Tarsolve - Tar & Bitumen Remover
Product Description
Tarsolve is an extra strong tar and bitumen remover that is designed to quickly remove deposits from a range of surfaces including plastic sanitation products. e.g. when trodden into portable toilet bases or splashed onto toilet side panels or plastic tanks.
Tarsolve is safe to use on vehicle paintwork and readily emulsifies with water allowing for easy removal of heavy deposits of tar and bitumen. A fast acting solvent based tar and adhesive remover that will also readily remove adhesives from the application of lettering and decals on vehicle paintwork.
£25.00
AVAILABLE IN THESE SIZES
Tarsolve
Tarsolve
1 x 5 Litre Tin
4 x 5 Litre Tins
1 x 5 Litres
4 x 5 Litres
TOIBLUE-TAR-01
TOIBLUE-TAR-01
DOWNLOADS & LINKS
RECOMMENDED DOSAGE / INSTRUCTIONS FOR USE
Use this product as supplied. Do not attempt to dilute with any other medium including water.
Apply by means of spray, brush or cloth to the area in need of treatment. Agitate and leave in situ for a few minutes, but do not allow to dry. Remove with either a cloth, or water. For heavily compacted areas it may be necessary to apply the product several times. Test on a small area first.
RISK GUIDANCE
- Highly Flammable liquid and vapour
- Keep away from heat, hot surfaces, sparks, flames and other ignition sources. No smoking
- Harmful if inhaled
- Causes skin irritation
- Causes serious eye damage
- Do not breather vapours or spray
- Wear suitable protective clothing, gloves and eye protection
- Use only outdoors or in well ventilated areas
- If swallowed, immediately call a doctor
- Do not induce vomiting
- Avoid contact with eyes and skin
- In case of contact with eyes, rinse immediately with water and seek medical advice
0800 334 5742
