Plastic Waste Tanks

Tank Linking Kit - Side-by-side

Product Description

"Why struggle to specify, fabricate, purchase, load and move a huge steel tank when our plastic tanks can be adapted and linked together quickly and easily using a Linking Kit?"
Jon Trelfa - General Manager, Sales & Marketing Lead

Need to extend waste collection capacity? No problem...! We have built in the functionality, which allows you to link and unlink our plastic tanks to create exactly the waste volume you need, job by job, site by site.

Use this 155cms long link kit to connect 2 (or more) 500 or 2 (or more) 750 or 2 (or more) 1000 gallon Tuff Tanks side-by-side. When in place, the tanks will be ca 20cms apart. Repeat as necessary.

Contact Us to enquire about the Tank Linking Kits.

BUY NOW

LINKING INSTRUCTIONS

Linking is simple - just connect the pipework!

Lay tank flat and ensure it is empty. You will be making a hole through the skin of the tank!
To convert each tank, remove the red caps to reveal the 52mm brass inserts (2 at each end).
Visualise how you want the linking kit to work and select the appropriate inserts you wish to convert (either for side-by side or nose-to-tail linking). NOTE: The grey plastic exposed once red cap is removed is the wall of the tank and will need to be holed (drilled out) to allow the tank contents to flow through.
Use a 51mm hole saw to drill through the centre of the port, inside the brass threaded insert.
Screw the 50mm male threaded tank adaptor into the brass insert. For best results use PTFE tape to create a watertight seal.
Connect the linking pipe. NOTE: When tanks are not linked, seal the holes using the 50mm dust caps, ensuring that the locking rings are folded over securely. Your tank will now work as a standalone tank.

TECHNICAL Illustration

DOWNLOADS & LINKS

How to link your Tuff Tanks - all tanks post 2014

Data Sheets

Waste Tanks

Water Tanks

Tank Spares & Chemiloo Additives

Shop

Waste Tanks

Water Tanks

LINKING BENEFITS

Create chains of 2 or more tanks where waste volumes are high. Linking allows any capacity to be met
Linking allows hire companies to offer flexible waste solutions whilst only having to keep one size tank in stock
Transport and set up of larger capacities is simple
Linking of tanks on site takes seconds with the easy 5-piece linking kit which uses ubiquitous camlock adaptors
Connect tanks side-to-side or nose-to-tail depending on site conditions

Additional Notes

Always ensure tank is empty before carrying out any conversion work
Multiple tanks can be linked to create the waste volume you need e.g. 3 side-by-side link kits will link 4 tanks
Linked tanks must be of the same size (volume) and at the same ground level
Tanks must not be stacked with contents onboard
Custom hose lengths are available