Water Pump - On-demand operation 230v / 110v / 16 amp
Product Description
When your construction, glamping or event site does not have a mains water supply, you can still provide water under pressure to toilets, showers or catering blocks etc. by using this electric, on demand water pump.
Suitable for use with clean water, this self-priming pump with its inbuilt pressure switch is designed to pump water from a water tank (e.g. IBC or other water tank).
As long as you can have water delivered to your site's water tank(s) and you can provide a 230v or 110v electrical supply to the pump, then this powerful unit will provide a typical flow of ca. 55 litres (230v version) or 45 litres (110v version) per minute.
When connected up, the pressure switch ill recognise a drop in pressure (e.g. when a tap is turned on inside the toilet unit) and will then activate the pump to start pumping water.
TECHNICAL DATA
KEY FACTS
- Please note: flow rate is dependent on the length and diameter of the hose from outlet to your site's toilet, shower block etc. Distance, height variation, bends in the pipe etc. will reduce the flow rate.
- This is a 1" pump with a filter on the inlet side and (typically) a 15mm quick-connect outlet fitting.
The 15mm quick-connect fitting can be removed to leave a 1" threaded outlet. - The pump should be installed in an enclosed environment or sheltered from inclement weather.
A "site-ready" option is available with the pump delivered inside its own protective box: connections to inlet and outlet pipework can be made with the pump still inside it's protective box. - The "site ready" versions include a 1m link pipe with male-female connectors
- Pumps have a simple cut-off function to prevent dry run damage
- 230v - 16amp version typically performs at 55 lpm @ 3 bar & 30 lpm @ 4 bar (lpm = litres per minute)
- 110v - 16amp version typically performs at 45 lpm @ 2 bar & 22 lpm @ 3 bar (lpm = litres per minute)
PERFORMANCE CHART
- Hydraulic Performance - JCR-2
Photo Gallery
0800 334 5742
