Water Steriliser
Product Description
Plastic Solutions' Water Steriliser is a unique product that has been developed to solve problems associated with the build up of bacterial contaminants in water containers, sinks, tanks and pipework used on sites and at events. It is an odourless formulation that removes and prevents bacterial, viral and algae growth. Use to sterilise water tanks, bowsers, connecting pipework and connectors, mobile shower units etc. prior to commissioning systems. Also use as part of an ongoing sterilising regime. Particularly useful to sterilise free-standing sinks and washstations during the Covid-era.
£19.50
DOWNLOADS & LINKS
RECOMMENDED DOSAGE / INSTRUCTIONS FOR USE
Initial dose: dilute 2 litres of steriliser with 1000 litres of clean water.
Subsequent treatments: dilute 1 litre of steriliser per 1000 litres of water.
Operate sink unit or equipment so that the mixture is present in all pipework and fittings.
Allow to soak for 2 hours before use. Diluted product may also be used by means of an atomising spray.
Ensure total coverage of all surfaces before commissioning equipment.
NOT suitable for use in containers or pipework which are used for drinking water.
RISK GUIDANCE
- Always consult the Safety Data Sheet, which can be downloaded from this page.
- May cause allergic skin reaction.
- Causes serious eye damage.
- Wear suitable protective clothing, gloves, eye protection.
- If swallowed, immediately call a doctor.
- Do not induce vomiting.
- Avoid contact with eyes and skin.
- In case of contact with eyes, rinse immediately with water and seek medical advice.
0800 334 5742
